The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

65 Fastback · 11-19-2015, 09:44 AM

Hi all,

I have a 72 C10 with what i think are factory discs on front, the rotor measures about 11" and they have various numbers stamped on them. They are quite rusted and look in poor condition so i want to swap them out. Do i just by like for like and change out the rotors, callipers and hoses or do i change out the spindles too? Do i need drop spindles? I'm happy with the ride height. Here are some pics if anyone could identify these so i know what i have thats a good start...
Name: thumb_IMG_1508_1024.jpg
Views: 176
Size: 51.2 KB

Name: thumb_IMG_1508_1024.jpg
Views: 176
Size: 51.2 KB

Name: thumb_IMG_1511_1024.jpg
Views: 166
Size: 70.7 KB

Name: thumb_IMG_1513_1024.jpg
Views: 170
Size: 76.8 KB

Name: thumb_IMG_1517_1024.jpg
Views: 175
Size: 65.8 KB

11-19-2015, 09:44 AM	#1
65 Fastback Registered User Join Date: Jan 2009 Location: Perth Australia Posts: 51	Front disc replacements 72 C10 Hi all, I have a 72 C10 with what i think are factory discs on front, the rotor measures about 11" and they have various numbers stamped on them. They are quite rusted and look in poor condition so i want to swap them out. Do i just by like for like and change out the rotors, callipers and hoses or do i change out the spindles too? Do i need drop spindles? I'm happy with the ride height. Here are some pics if anyone could identify these so i know what i have thats a good start...