The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OldChevy61 · 11-20-2015, 11:22 AM

Took a little break from the truck for hunting season. Now putting the control arms back on. When I tore the uppers off,I bagged and tagged each bolt with shims and spacers so to get it back where it was before. Between the control arm shaft and frame there is a round spacer. Is there a spacer between both the front and rear bolt or just the rear. I have spacers in the bags for the rear bolts,but not the front. Looking at it , they need to be there. Thanks for any help.

11-20-2015, 11:22 AM	#1
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	62c/10 upper control arm instalation Took a little break from the truck for hunting season. Now putting the control arms back on. When I tore the uppers off,I bagged and tagged each bolt with shims and spacers so to get it back where it was before. Between the control arm shaft and frame there is a round spacer. Is there a spacer between both the front and rear bolt or just the rear. I have spacers in the bags for the rear bolts,but not the front. Looking at it , they need to be there. Thanks for any help.