[61K10]

Here is some pics of my mock-up of disc brakes on the closed knuckle dana44. (Danw210) did this on his 3/4t dana hd44. It works for the 1/2t axle also. also rebuilt my lesf springs with new bushings. don't buy the bronze bushing from LMC as they are too short, and there u-bolts don't fit either. you can use the big one but the smaller ones are 3" wide but need to be 2-3/4 for the dana axle tubes. I am also using Captianfab's master/booster /hyd clutch plate. will post some more step x step later.