[Zoomad75]

The connectors at the range switch are a little stubborn, but with a small pocket screwdriver or pick they should come free. The top connector, pull the blue clip out of the connector. Then lift up on the grey loop that is just to the left of where you pulled the blue clip from and it should release. Remember these are weatherpack connectors so the rubber gasket inside might not make the connector pop right out, you might have to work it side to side to get the gasket to release. The lower white connector just needs that bail end pulled up over the lock to release. Still, work the connector once it is loose from side to side to finally pull it out.


Heads look clean! Good Score!