The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - LSX adapters that Aruba1 mentioned in Ackattack's thread

Aruba1 · 12-30-2015, 09:47 PM

I purchased a set from them (LSX to SBC location, non-adjustable) over a year ago and I believe I paid like $45.

I was very pleased with the product however on my adapters I had to make some very small modifications. The adapters bottomed out (D and P side) on the ridge of the block and if you don't grind the ridge by roughly 1/4" you will bent the adapters or break something else. I think one of the countersink bolts had to be shorted a little bit as it bottomed out. The other issue was related to just the Passenger side. I had to cut off 1/4" of the bottom of the motor mount so it would clear the boss (?) where the a/c bracket is suppose to go. These are very minor modifications and in my opinion the adapters are too under-priced.

Sorry for the broken english, lol.

12-30-2015, 09:47 PM	#6
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: LSX adapters that Aruba1 mentioned in Ackattack's thread I purchased a set from them (LSX to SBC location, non-adjustable) over a year ago and I believe I paid like $45. I was very pleased with the product however on my adapters I had to make some very small modifications. The adapters bottomed out (D and P side) on the ridge of the block and if you don't grind the ridge by roughly 1/4" you will bent the adapters or break something else. I think one of the countersink bolts had to be shorted a little bit as it bottomed out. The other issue was related to just the Passenger side. I had to cut off 1/4" of the bottom of the motor mount so it would clear the boss (?) where the a/c bracket is suppose to go. These are very minor modifications and in my opinion the adapters are too under-priced. Sorry for the broken english, lol.