[duallyjams]

Originally Posted by forestb

Is the channel supposed to go into the felt?

From the factory it does, there two ways you can correct this.
1) if you have the glass cut at a shop you can add 1/4 to the bottom that will put the channel below the window wips
2) some times it's depends on the doors or the windows wipes that you get with the placement of the clips but as you can see if you use the clips the window wipes are below the top edge of the door they should be up flush, you can raise them up by either glue or using very small screws. I have noticed on my three trucks the driver side has the problem.