The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

hugger6933 · 01-13-2016, 01:34 PM

I ran through a time where everything I had turned to crap even both of my lawnmowers were broken. I think the thing to do is to pull the head and carry to a machine shop and they can grind down the perch and install screw in studs. But look around you might find a good set of heads for less money. like I had a fresh motor and pulled the heads to do a vortec swap. You might run across a deal like that,those heads are like new they are fresh and wrapped up in a bag so they are probably good for somebody or something. Like changing out older heads to those to have bolt holes for the front stuff.

01-13-2016, 01:34 PM	#8
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,281	Re: Need some help please!!! I ran through a time where everything I had turned to crap even both of my lawnmowers were broken. I think the thing to do is to pull the head and carry to a machine shop and they can grind down the perch and install screw in studs. But look around you might find a good set of heads for less money. like I had a fresh motor and pulled the heads to do a vortec swap. You might run across a deal like that,those heads are like new they are fresh and wrapped up in a bag so they are probably good for somebody or something. Like changing out older heads to those to have bolt holes for the front stuff.