The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 01-13-2016, 05:02 PM

I have a carburetor from an 81 292 engine. It has the electric choke so it can be used on any manifold without divorced coil & linkage. The vacuum pulloff works & the heater coil works. as does the idle selinoid. It should have a kit put in before use as it has been setting for a long time. This carb has a larger bore & venturi then the 250. It has no rust or corrosion. $50 plus $15 shipping.
George
SOLD

01-13-2016, 05:02 PM	#1
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	292 carb. I have a carburetor from an 81 292 engine. It has the electric choke so it can be used on any manifold without divorced coil & linkage. The vacuum pulloff works & the heater coil works. as does the idle selinoid. It should have a kit put in before use as it has been setting for a long time. This carb has a larger bore & venturi then the 250. It has no rust or corrosion. $50 plus $15 shipping. George SOLD Attached Images Last edited by Wrenchbender Ret; 01-23-2016 at 05:45 PM. Reason: Sold