Re: "Geronimo" 54' 3100 LS built in PA
1-18 Monday, not much to report, didn't work but a few hours on the truck this week. Got headers and I'm happy with them, seem like they will clear no matter how high or low the engine is. I ordered up some poly bushings and DOM to make my engine mounts. I tossed on the only trans I have just to get a "ballpark" on things. I'm waiting for the drop blocks to show up for the rear then I'll level the front and get on dialing in the engine placement. I'll toss cab back on for that.
In the rear, I haven't finalized the leaf springs quite yet. So I started on the one side. I used the plasma to cut the circle out of the frame, then welded in the tubing and put the bushing in.
Finally found a decent deal on an ash tray for the dash, I'll have to do some fabbing as the back of the dash is jacked up and the ash tray has nothing to pivot on.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481
49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA
Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162
52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame
Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!
www.coffeeandcustoms.com
|