The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 01-23-2016, 11:52 AM

The cross member is the same on the 73 and up as the earlier C10 so everything will bolt up. There are a couple of holes to drill when putting the later cross member in. All you need to do is get stuff for 73 and up for the drop spindles and other parts. The tapers on the tie rods and ball joints are bigger on the 73 and up so just order that stuff and it will all match. Both my trucks have this stuff under it.
Jimmy

01-23-2016, 11:52 AM	#9
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: New guys front end ?'s The cross member is the same on the 73 and up as the earlier C10 so everything will bolt up. There are a couple of holes to drill when putting the later cross member in. All you need to do is get stuff for 73 and up for the drop spindles and other parts. The tapers on the tie rods and ball joints are bigger on the 73 and up so just order that stuff and it will all match. Both my trucks have this stuff under it. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic