Quote:
Originally Posted by jturner18
Ok, I'll ask here because you guys are the wealth of knowledge on these year of trucks...which year was the best year 73-87. I know some of you will say, "all of them" but please refrain. Lol. I currently have a 65 stepper and love it and stay over in that section of the forum, but I am considering getting a daily driver squarebody. I like the looks of the 73-80s' body's type because of the side molding. But hey, they're all awesome! So... which year is the best "all around" from these year models?
Thanks,
JT
|
If you are going to drive every day then I would get a 87 so you can have TBI. Depends what you are looking for. If you are looking for a 4x4, I would go for a 81+ for the part time transfer case. The 73-80 4x4's have a NP203 full time transfer case, you can buy a conversion kit to make it part time 4x4 like the NP208 found in 81-87 4x4's, but you will need to run it in 4x4 every 100 miles or so to lubricate it. After that, it all comes down to what kind of front end do you like, 73-75 are getting really popular and expensive now. Personally, I like 81+ because the interior is a little more spruced up compared to the 73-80.
Something else to consider is if you have to smog vehicles where you are. 73-82 trucks without Electronic spark control are easier to smog. As you may know starting in 73 horsepower took a major downturn due to emission regulations, and only got worse until 87 when they introduced TBI, my 81 when it was new made 175hp with the ls9 350. These were the smog dog days also known as the "malaise era".
Problem area's for squarebody trucks:
RUST RUST RUST!! cab corners, floor pans, inner/outer rockers, behind the rear wheels, and under the windshield seal, especially on the bottom, and the bottom of the doors are VERY prone to rust especially if they were driven in the rust belt. I think starting around 1978-1980 they had somewhat better rust protection (my 81 has some sort of sprayed sealant in the bottom of my doors). 73-75 trucks seem to be the worst for rust.
Steering box: Look for cracks around the steering box, this is a common area where the frame will crack especially on 4x4's 73-80 seem to be a little worse, since the 81+ trucks have a small brace from the factory. Also on 4x4's look on the right side of the engine crossmember, the frame cracks there as well. Even 2wd trucks can crack there, fortunately they sell a bolt in brace, and a weld on plate.
Water leaks: These trucks are about as water tight as a cheese grater, check the fresh air floor vents, if you don't have AC. Windshield seal leaks are very common as well. The cowl seam also tends to dry out crack and eventually rust out the firewall.
These are great trucks and parts are still plentiful and cheap, grab one while you can though, values are going up quite fast. As you know older chevy trucks will always be in style.
I Love my 81 for the turn signals in the bumper and the grille, and the part time transfer case.