|
Re: Clearance around bags
Quote:
Originally Posted by Coach529
I am not too worried about the integrity of the notch, but you have me thinking.
Is there a ride quality difference between the two bags?
|
Yes, there can be a difference but 'how much' is subjective. Some guys run the larger bags in the rear & use less pressure to achieve ride height for a better ride. I tried that on my 68 (7" bag equivalent) on the rear & found I was @ <30psi for my ride height. It basically had no spring rate @ that low of a pressure & the result was a very bouncy ride quality. By swapping to smaller bags I had to increase the inflation pressure to achieve the same ride height. Now I was @ ~40psi & no more bouncy ride (same shocks used for both).
Some guys may not notice. I definitely could.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|