Quote:
Originally Posted by ray_mcavoy
You don't need to run the new wires all the way up to the dome light. The existing dome light circuit has 2 wires. There is an orange wire that is a constant 12V feed and a white wire that is a switched ground. The stock setup has the white wire going to the headlight switch which grounds it (to complete the circuit and turn on the light) when you turn the knob all the way counterclockwise.
The added door pin switches also complete the circuit to ground when the door is open. So their wires can simply be spliced into the dome light's existing white wire at any convenient location. Like under the dash near where the white wire connects to the headlight switch for example.
|
ahhh got ya thanks for better explaining it for me that's much better .. sorry im sure i should have been able to get that but thanks for taking the time to explain it to me a bit slow on the uptake here ... Happy Truckin
