|
Re: Speedo Gear Question
sounds like the drive gear could have stripped teeth. or the bullet gear is stripped where the cable goes into it(square hole).
i'm pretty sure the driven gear in the trans will always be the same in a sag 3 spd., its the bullet gear you change for speedo calibrations.
i would look both parts over very carefully you should be able to see inside the trans to the drive gear. spin the driveshaft in neutral to see the whole gear.
__________________
81 camaro 355 4/spd 342 posi my first love  .
67 swb step 454/4spd ott 373 posi 4/7 drop.
2000 s10 zr2 little blue truck that never gets stuck.
'74 heald super bronc vt8. tecumseh powered moon rover.
|