The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

stepside71 · 03-02-2004, 01:21 AM

What I am doing is going with a tank out of an 89 Impala. It had tbi fuel injection with the pump in the tank. I will be welding 3 inch space bars under the frame. I will then cut out a hole behind where the tag will go. Don't forget the folddown tag hinge. The gas tank neck will be shortened and fitted to be right behind the tag by using a piece of rubber hose .BTW I am using a tbi system out of an 89 van.

03-02-2004, 01:21 AM	#2
stepside71 Project Money Pit Join Date: Jan 2004 Location: Pensacola Florida Posts: 90	What I am doing is going with a tank out of an 89 Impala. It had tbi fuel injection with the pump in the tank. I will be welding 3 inch space bars under the frame. I will then cut out a hole behind where the tag will go. Don't forget the folddown tag hinge. The gas tank neck will be shortened and fitted to be right behind the tag by using a piece of rubber hose .BTW I am using a tbi system out of an 89 van. __________________ For sale: GMC rad support $50, L/F 69-72 fender $50, (1) 69-72 & 67-68 Chevy hood $50 ea.,1 disc brake spindles w/ calipers and rotors $ 25 WTB: (1) R/F inner fender. OR will trade Last edited by stepside71; 03-02-2004 at 01:26 AM.