Quote:
Originally Posted by steveo3318
The supplied line is more than adequate for the high pressure side. I literally put 220 lbs jumping trying to pull them apart. But to each his on. I love my system. The only problem I have seen is my low pressure gauge was leaking fuel inside of it and then leaking fuel out on top of the command center. We are only talking a drop an hr. I had an oil filled gauge I replaced it with which stopped the needle bounce anyway.
|
Well, since I had to put the command center over on the driver side, I only had enough of the hose they supplied to run the supply side. I guess I could've used that hose on the pressure side and got some cheaper hose for the supply but I plumbed the supply first. The hardest part about this install is dealing with my OCD and mounting everything in a way/place I am happy with. I'm still trying to figure out a way to run the fuel lines under the front of the truck that I like. This would have been so much cleaner if there was room around the battery somewhere.
I usually end up getting aeroquip lines made for stuff like this so just did my best estimate of lengths and ordered some pre made.