Quote:
Originally Posted by scuderia
I used fusor and one tube did the job. I put zipties in the drain holes to keep them clear and jacked up the front of the truck to make it as level as possible.
The only difficult part was getting around the front portion of the cab while trying to keep the tip submerged in the sealer. Would help to have someone to grab the gun and hold while you reposition yourself. Other than that it's a pretty straight forward job. Oh, and be careful to not use too much coming down the hill as it flows quite a bit and makes a pretty deep puddle at the bottom. Warm day or heated garage will help.
|
How big of a hole did you use on the mixing tip?