[dsraven]

maybe you could figure something out with some welders series brackets. this is what i did using an explorer 8.8 and a ranger sway bar sway bar uses some muffler clamp parts that fit the diff tube diameter and some u bolts that a spring shop made up. the panhard bar is also a welders series unit but made my own frame bracket to keep it level at ride height and modified the diff bracket to suit my needs. the frame end of the 4 link is just a diff bracket modified and welded to a tube that welds to a flat bracket on the frame to spread the weight. the diff end is set up with a platform for an air bag. again, welders series. it is a work in progress and will need some bracing on that tube. anyway, not rocket science and will probably work just fine. you can't buy the DOM tubing and thread it all, supply all the ends and bushings etc for what you can buy this stuff for. especially with the US dollar what it is compared to Canadian.