The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mongocanfly** · 02-20-2016, 10:55 AM

If you use a factory harness be aware that if you didn't remove it there may be issues..on mine the removers evidently sawed about halfway thru the big part of the harness with a sawzall..then they pulled the convoluted cover back over it...you couldnt tell it until i started pulling it apart....so I went with psi..no complaints..

02-20-2016, 10:55 AM	#11
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,695	Re: wiring harness for an LS swap If you use a factory harness be aware that if you didn't remove it there may be issues..on mine the removers evidently sawed about halfway thru the big part of the harness with a sawzall..then they pulled the convoluted cover back over it...you couldnt tell it until i started pulling it apart....so I went with psi..no complaints..