The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mr48chev** · 02-20-2016, 04:38 PM

The wheel will fit on the spline and bolt up but the piece for the horn and the turn signal canceler may not work right. I'd have to think that is why Ididit told you it won't fit. Better to have a guy upset because you told him his wheel won't fit your column rather than having him raising hell all over the internet because all the functions won't work as he expected or the fit isn't as perfect as it could be.

As far as keys, even my wife's 97 Monte Carlo still has two keys. One for the ignition and one for the glove box, doors and trunk so I don't see what the big deal about only having one key is or why it is worth worrying about. Possibly if you had never driven a car or truck built before about 2000 before it would be a big deal but having grown up in the days when every rig had an ignition key and a door key for the most part it shouldn't be an issue.

02-20-2016, 04:38 PM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,838	Re: Ididit with keyed ignition? The wheel will fit on the spline and bolt up but the piece for the horn and the turn signal canceler may not work right. I'd have to think that is why Ididit told you it won't fit. Better to have a guy upset because you told him his wheel won't fit your column rather than having him raising hell all over the internet because all the functions won't work as he expected or the fit isn't as perfect as it could be. As far as keys, even my wife's 97 Monte Carlo still has two keys. One for the ignition and one for the glove box, doors and trunk so I don't see what the big deal about only having one key is or why it is worth worrying about. Possibly if you had never driven a car or truck built before about 2000 before it would be a big deal but having grown up in the days when every rig had an ignition key and a door key for the most part it shouldn't be an issue. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.