The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Borgeson Delphi 600 Power Steering with manual transmission?

BT Classics · 02-22-2016, 07:07 PM

Hoping someone has run into this issue and could help me out.
Working on a 1956 Chevy. Purchased a Borgeson Delphi 600 Power Steering box that was advertised as a conversion kit for the '56 (with modification to the steering column). The problem I'm running into is that the shaft from the clutch linkage is hitting the power steering rod.

I called Borgeson and they weren't sure if the power steering box or rag joint should be different for a manual clutch set up.

Anyone?

02-22-2016, 07:07 PM	#1
BT Classics Registered User Join Date: Mar 2004 Location: Albany, NY Posts: 108	Borgeson Delphi 600 Power Steering with manual transmission? Hoping someone has run into this issue and could help me out. Working on a 1956 Chevy. Purchased a Borgeson Delphi 600 Power Steering box that was advertised as a conversion kit for the '56 (with modification to the steering column). The problem I'm running into is that the shaft from the clutch linkage is hitting the power steering rod. I called Borgeson and they weren't sure if the power steering box or rag joint should be different for a manual clutch set up. Anyone?