The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 02-23-2016, 04:16 PM

I used the S/S works headers, 1 /34" tube headers with 2.5" aluminized pipe all the way back. S/S Megaflows also. have no issues with the clearances on either side. The drivers side has the gear cable mounted so it's a little close but has plenty of room to be took out of the truck without taking the exhaust out.
Best pictures I have of them.

02-23-2016, 04:16 PM	#25
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 4l80 and headers? I used the S/S works headers, 1 /34" tube headers with 2.5" aluminized pipe all the way back. S/S Megaflows also. have no issues with the clearances on either side. The drivers side has the gear cable mounted so it's a little close but has plenty of room to be took out of the truck without taking the exhaust out. Best pictures I have of them. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.