Quote:
Originally Posted by tony2tall
I just tried the rod linkage from cpp and there is not enough clearance with the dt header. I don't think there is really any difference between that and the Lokar one.
|
re-looking at that pic, its exactly like mine was, ie the rod but I had mine installed differently, I hade mine reversed, ie the set screw piece was at the trans and again, I had to install all the trans side of the rod stuff before the headers. I remember that being a PITA b/c I had the headers all on and thought I would not have to move them but there was no way to get the trans stuff set up. And Again, I could only pull the shifter down to 3rd without interfering with header and not allow it to go any further.
Even the cable style will have to be attached to the trans before header is in place, there just is no room with the exit location of the header.