The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NJ C10 Guy · 03-10-2016, 12:35 PM

I have my speakers in the dash, without the dash pad on and I am running into 2 issues. The speakers are 3.5" Infinity http://www.crutchfield.com/S-eqRCYUx...F-3002cfx.html

1. The driver's side I can't seem to bolt in the right way. The ears of the speaker don't line up with the mount holes and if I rotate it, the speaker connections hit the metal dash and short out and I have to reset my head unit.

2. The speakers sit too high on the dash and I cant put the dash on without it contacting the speakers, which is obviously an issue. Should I cut down the mounting rings and tack them directly to the dash, or is there another way you guys have done it?

03-10-2016, 12:35 PM	#1
NJ C10 Guy Registered User Join Date: Sep 2014 Location: Toms River, NJ Posts: 437	Infinity 3.5" speaker issue I have my speakers in the dash, without the dash pad on and I am running into 2 issues. The speakers are 3.5" Infinity http://www.crutchfield.com/S-eqRCYUx...F-3002cfx.html 1. The driver's side I can't seem to bolt in the right way. The ears of the speaker don't line up with the mount holes and if I rotate it, the speaker connections hit the metal dash and short out and I have to reset my head unit. 2. The speakers sit too high on the dash and I cant put the dash on without it contacting the speakers, which is obviously an issue. Should I cut down the mounting rings and tack them directly to the dash, or is there another way you guys have done it?