Quote:
Originally Posted by 99 to Life
looking great, like this was all meant to be! the crossroads you are at well... sux but can be dealt with. A plasma would make it much easier to get to from underneath. Either way that or a small air tool with cut off disc might get under there. I'd opt for some speedway tubular uppers ($100 can beat that), then drill a hold in the upper tower and try and fee the line in the center of the control arm. Not sure if you'd have enough clearance with those arms. Keep in mind when the engine is in there, you're headers will be right in that area too, so you may consider some braided line in that area.
|
I was actually thinking of using a 90D fitting and coming out the side of the spring cup with the air line.