[Raszaron]

Hello everyone, name is Chris but I go by Dirk.

I am just getting back into the old Chevy game and I am starting off with something that I am not all that familiar with, a 1964 Chevrolet C20.

It currently has a 350 and 4 on the floor (with granny low). I haven't pulled the numbers off of the rear end yet, but I am thinking it is at least 4.11.

I know it is a 3/4 ton and this is where it will possibly become tricky at completing this build as it has already had a lot of work done to it.

Things on my list:
1. Remove and relocate gas tank from cab to under the bed, finish work on Cab supports, and add a harness bar w/ harnesses.
2. Adding the Retro style EFI system (already have one)
3. Upgrading the suspension and brakes - HERE'S WHERE I WILL NEED ADVICE!
- I want to convert to all disc brakes and change from 8 lug to 5 lug
4. Swap out the 4spd and Rear end for something more highway friendly!
- T5 and rear end with 3.73.