[ETraugott]

Holley relocating bracket and spacing kit. I got it installed last night. There is some clearnce issues if trying to use the stock intake piping fron filter box to intake manifold. There is a piece that hangs off the bottom. I cut it off and plugged the round hole. Also had to heat a small area on top with heat gun and push it down. The other alternitive is i know the spectre cold air kit off of a 2000 will work with no issues also. My buddies truck has one and i test fit it so it will also work. The low pressure line is a little to short, my solution is to cut the aluminum tube at compressor fitting and reweld for a better angle. I slso got the shift linkage hooked up last night. Had to modify it also for clearence because newer trans had the black box on side. Hopully tonight i will get the fuel lines connected and the intake bolted down for good.