Quote:
Originally Posted by Captainfab
All you need are '73-'87 C10 ball joints. They will fit the '63-'70 control arms just fine. You could also just change the complete control arms and have the better rubber bushings. If you change your entire steering linkage to the '79 linkage, you won't need those special tie rod couplers. However you will need to drill holes to bolt up the later model idler arm.
I don't remember for sure on the width increase but I want to say it is 3/4" on each side?
|
Where can you get these special tie rod adjusters and why do you need them I'm going 63 /79 spindles ?