Quote:
Originally Posted by _Ogre
part number 6 and 9 from lmc truck should fit your fender
you'll only use a sliver of the fender panel but the fender brace will be the same
with some creative hammering you could introduce the curve if you need to
your viking uses the same 31-38 cab and thus the back portion of the fend should fit too |
.
yes and no...
I understand buy the lower fender piece (outer skin) and hammer and stretch
it to the shape
I don't have those skills... I've tried it doesn't come easy
the magic is were the inner fender skin that runs up the edge of inside the fender & connect to the lower corner of cab bracket that inner piece is gone
either have to fab it a find a good used fender to butcher
.
Stdby I got a pic......Sp
.
.
.
.
.
.