The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Clearance issue between brake booster and carb inlet

Rondaddy · 04-20-2016, 10:49 AM

I'm having a clearance issue. I rebuilt the 292 I6 using Clifford intake and Weber 2 barrel carb. The fuel line inlet on the carb is not clearing the 11" power brake booster. I'm looking for options. Anybody deal with this? I'd consider buying a smaller diameter booster if there is an easy swap. Perhaps the mount could be modified to move the booster closer to the firewall, any thoughts on a good solution for the issue.

1968 K10.

04-20-2016, 10:49 AM	#1
Rondaddy Registered User Join Date: Apr 2016 Location: Johnstown PA Posts: 2	Clearance issue between brake booster and carb inlet I'm having a clearance issue. I rebuilt the 292 I6 using Clifford intake and Weber 2 barrel carb. The fuel line inlet on the carb is not clearing the 11" power brake booster. I'm looking for options. Anybody deal with this? I'd consider buying a smaller diameter booster if there is an easy swap. Perhaps the mount could be modified to move the booster closer to the firewall, any thoughts on a good solution for the issue. 1968 K10.