[60chevyjim]

on my 93GMC with a 1975 454 I put in it
I cut the metal part of the high pressure lines from the box and the pump and used a union and 2 fittings by flaring the end of both of the high pressure lines after putting the fittings on to connect the two different lines together with the union on the high pressure line . I had both sets of hoses Oring from the box and flare from the 454 pump
the low pressure line just uses a hose clamp on the hose so if you have the fitting from the box with the Oring that one is ez to do.
or you can use google to find the adaptors your looking for .