|
Re: Better kickpods in 60-66 Trucks
Before getting started, you should know that I have the Vintage Air system and do not need my fresh air vents. If you need to retain your vents, then you will have to modify some of these steps...
First step is to thoroughly tape off the entire area you will be working on. I use 2" blue tape. Tape the kick panel from the bottom up, so that the next layer of tape will overlap the previous layer. This prevents resin from dripping down onto the sheet metal...
I also use two strips of about 4 to 5 layers of tape to pull everything up once I am done glassing everything. You can see the strips sticking out to the left...
|