|
Re: Better kickpods in 60-66 Trucks
With the vinyl now stretched, I run my wires and mount up the speakers. There was one item that I forgot...and when I washed the truck for the first time, I flooded the entire floorboard with water.
To remedy, I built some baffles out of mdf and fiberglass that fit into the opening of the cowl vent and then used silicone to seal the baffle to the sheet metal of the kick panel. Note...I left the baffle open and pointed down and covered everything in several coats of resin so that in 20 years, it will be as good as it is today...
|