The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 05-07-2016, 08:51 PM

CCP has a rear axle clamp for a brake T, I think the part number is RFH-TK. After cutting off the panhard bar bracket from the rear end I moved the brake T to the drivers side of the axle tube. I will be running my rear brake lines down the drivers side of the frame. I'm using rear discs as well. I purchased the rear panhard bar kit from Early Classic that runs from the drivers side frame to the passenger side trailing arm.

05-07-2016, 08:51 PM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: brake lines for disk conversion? CCP has a rear axle clamp for a brake T, I think the part number is RFH-TK. After cutting off the panhard bar bracket from the rear end I moved the brake T to the drivers side of the axle tube. I will be running my rear brake lines down the drivers side of the frame. I'm using rear discs as well. I purchased the rear panhard bar kit from Early Classic that runs from the drivers side frame to the passenger side trailing arm. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?