[Gregsmx]

Big Blazer. I have a manual gate with a good window in it from a '75 Blazer. It'll fit ('73-'91) and I know this because I just installed a power window operated gate from a '91 into the '75.

This gate is in 'good' shape, not great. It has some rust in the bottom as most do from this period, however, it poses no visual or structural deficiencies due to the rust. I filled the holes with POR15 and was going to use the gate in my restoration until I opted for the power window.

I also partially stripped the paint and found some body filler from what looks like surface dings from backing into trailer tongues probably. However, when inspecting from the inside of the gate, you do not see any of these dents so I'm not sure why the body filler is there (no rust in this area at all).


I've also got a brand new manual roll handle from LMC ($50).

I do not have the bright metal back panel as I will be using it on the new gate. I can throw in the rear panel for the '91 for an extra $20.

$150 for the gate and handle, plus shipping.

Look at my cardomain website and on the last page you'll see a pic of the gate before the restoration started. I'll be out of town today/tomorrow, but can post some decent pics on Friday.
Thanks, Greg.