The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What's a good way to plug up a firewall hole?

Andy4639 · 05-15-2016, 09:06 AM

Don't be to fast in plugging that hole yet!
Depending on what pump and where you mount it you need to run wires and tubing through the fire wall. Later time you may need more stuff ran through the fire wall. Those little holes want hurt you much if left open for a while and see!

05-15-2016, 09:06 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What's a good way to plug up a firewall hole? Don't be to fast in plugging that hole yet! Depending on what pump and where you mount it you need to run wires and tubing through the fire wall. Later time you may need more stuff ran through the fire wall. Those little holes want hurt you much if left open for a while and see! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.