The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kolohekane · 05-25-2016, 12:33 AM

I relocated my fuel tank to the rear of the truck, a 1967 c10 2 wheel drive. I don't want to cut a hole in the perfect sheet metal on the side of the bed, I also use the bed to haul stuff and some times have a camper top so I don"t want a bed fill. I wanted to make a copper fill pipe going from the stock fill location.I know I will be punching new holes in the back of the cab, but they wont be seen. Do I need to worry about gas fume build up in such a long tube run.
Thanks for any input.

05-25-2016, 12:33 AM	#1
kolohekane Registered User Join Date: Apr 2016 Location: Alamosa Colorado Posts: 5	fuel filler I relocated my fuel tank to the rear of the truck, a 1967 c10 2 wheel drive. I don't want to cut a hole in the perfect sheet metal on the side of the bed, I also use the bed to haul stuff and some times have a camper top so I don"t want a bed fill. I wanted to make a copper fill pipe going from the stock fill location.I know I will be punching new holes in the back of the cab, but they wont be seen. Do I need to worry about gas fume build up in such a long tube run. Thanks for any input. __________________ Never enough time to do it right, always time to do it twice.