The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1972chevc10 · 05-26-2016, 01:13 PM

Thanks for the advice, but I have traced all 4 words from the plug at the back of the bed and none of the wires are cut and spliced. I forget to mention that I had to change around how the wires plug into the rear connector to get everything working when it did work. Sounds to me like in where it goes into the cab could be messed up. All the wire on the frame has no tape or anything and none of the wires are bad. They are all the right color too.

05-26-2016, 01:13 PM	#3
1972chevc10 Registered User Join Date: May 2016 Location: Effie, Louisiana Posts: 3	Re: 1072 c10 Fleetside tail lights Thanks for the advice, but I have traced all 4 words from the plug at the back of the bed and none of the wires are cut and spliced. I forget to mention that I had to change around how the wires plug into the rear connector to get everything working when it did work. Sounds to me like in where it goes into the cab could be messed up. All the wire on the frame has no tape or anything and none of the wires are bad. They are all the right color too.