The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What drop spindles to use when running 15 in truck rallies?

snipescastle2 · 07-04-2016, 03:53 PM

If you could post a picture of the issue you're having might help us see what's going on there. I had to trim a little of the lower control arm in order to clear my wheels, make sure your ball joints are fully seated in the control arm, there shouldn't be any rubbing because of the ball joints, I'm betting its the control arm hitting.
Have a good one!
Ben

07-04-2016, 03:53 PM	#6
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: What drop spindles to use when running 15 in truck rallies? If you could post a picture of the issue you're having might help us see what's going on there. I had to trim a little of the lower control arm in order to clear my wheels, make sure your ball joints are fully seated in the control arm, there shouldn't be any rubbing because of the ball joints, I'm betting its the control arm hitting. Have a good one! Ben __________________ "Persistence is the twin sister of Excellence.one is a matter of quality,the other, a matter of time" “Serious Black” my 1971 Short Bed Fleetside Sold to an outstanding man in Lees Summit,Mo. “Gone, but by no means,Forgotten”