The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OrrieG · 08-10-2016, 04:17 PM

I used a positive battery cable with a built in 10 ga. wire attached to it. I put a distribution buss on the side of the battery box. I then ran a fusible link and 12 ga wires to the headlight and a/c relays I wanted to power. Picture does not show the supply that bolted to the left end. I got the buss at local auto electric shop.

08-10-2016, 04:17 PM	#6
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Power dist block I used a positive battery cable with a built in 10 ga. wire attached to it. I put a distribution buss on the side of the battery box. I then ran a fusible link and 12 ga wires to the headlight and a/c relays I wanted to power. Picture does not show the supply that bolted to the left end. I got the buss at local auto electric shop. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project