Some more progress
Installed the new flywheel.
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160816_120417114_zps7xe4vyqh.jpg)
**
Installed the advanced adapters transfer case adapter to link the 4l80e to the np205
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160816_144715984_zpsecq7yyef.jpg)
**
new torque convertor
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160816_144804881_zpsec00onhz.jpg)
**
mounted the transmission to the motor
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160816_181040828_zpsltnqhz13.jpg)
**
Going to move the cross member back. Came up a little short even with the motor mount sliders
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160816_181053383_zpsulygkmwv.jpg)
**
Lowered the body almost all the way on the frame to check motor clearence
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160817_101907940_zps0edjlszo.jpg)
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160817_101921034_zpscqlo5ewq.jpg)
**
Clearance was good all the way around
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160817_101933524_zpsfq6wdfbl.jpg)
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160817_101946174_zpsuuqy3qpf.jpg)
**
While the body is down I am going to figure out the radiator and fan situation.