Installed the intake manifold. I replaced the original with a dorman truck manifold. I added RTV around the top of the grommets out of habit, but the water intrusion issues on the LS trucks were from a bad hood to cowl seal. I don't think that will be an issue on my rig, but the upper plate is designed like a ramp to flow water right into the harness grommets. I figured it couldn't hurt.
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160822_182231322_zpswlm0lnuk.jpg)
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160823_154456820_zpsjajaxvbz.jpg)
**
I stripped down the fuel rails to clean, polish and reseal. Had the injectors rebuilt locally.
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/img_20160406_163113635_zpsgpgsea5g.jpg)
**
![](http://i1279.photobucket.com/albums/y521/Blzrboy/72%20Jimmy/Re-Assembly/IMG_20160823_082752561_zpsdfipj0mg.jpg)
**