View Single Post
Old 09-06-2016, 10:27 AM   #2
bhayes1
Registered User
 
bhayes1's Avatar
 
Join Date: Jun 2016
Location: Central California
Posts: 229
Re: replace front NP205 seals with transfer case in truck

I'm curious to see what the seasoned members around here have to say on this. I just replaced the seals in my NP205 and removed the T-Case from the truck. The adapter that fits between the T-Case and TH350, I had to machine a piece to press both of the seals into it with a press (they fit pretty tight). Once the seals were in I bolted it back up to the tranny, put the sleeve inside of the adapter and stabbed the T-Case. Hope there is any easier way for you, but I couldn't think of any or find any info on it. There is a wealth of info on rebuilding the NP205 but not much that address these two seals specifically.
bhayes1 is offline   Reply With Quote