The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - FITECH EFI 600 Basic and Command center intall with pics, factory tank

steveo3318 · 09-21-2016, 12:04 PM

From what I can tell length of time at certain Rpms. I am not sure on that one. They won't let me have the software tool to look that deep. That's why if your actual cruise rpm is lower than their 3000kpa cruise set point you have to overshoot your set points.

3000kpa set to 16 = 15.4 afr for me at 2200. If I run the truck up to 3000rpms the 16 afr set point will kick in and run my truck at 16afr but it has to sense it's in cruise "closed throttle" and a time limit go by. Does that make sense?

09-21-2016, 12:04 PM	#204
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: FITECH EFI 600 Basic and Command center intall with pics, factory tank From what I can tell length of time at certain Rpms. I am not sure on that one. They won't let me have the software tool to look that deep. That's why if your actual cruise rpm is lower than their 3000kpa cruise set point you have to overshoot your set points. 3000kpa set to 16 = 15.4 afr for me at 2200. If I run the truck up to 3000rpms the 16 afr set point will kick in and run my truck at 16afr but it has to sense it's in cruise "closed throttle" and a time limit go by. Does that make sense? __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"