The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jocko** · 09-26-2016, 08:38 PM

welcome aboard! nice Cheyenne Super you have there, and in one of the most desirable configs too - a swb K10!

#1 - recommend go back to properly sized factory clutch fan
#3 - check dieseling solenoid on the carb and ensure initial timing properly set.
#4 - put the half-soup can shield between starter and the block. Don't see any, but no headers, correct?
#6 - what gear ratio are you seeking? Probably have a pretty decent one from the factory for the K10 with big tires added. Might be easier to add an o/d trans than swap both gearsets.

09-26-2016, 08:38 PM	#3
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,995	Re: New to Forum welcome aboard! nice Cheyenne Super you have there, and in one of the most desirable configs too - a swb K10! #1 - recommend go back to properly sized factory clutch fan #3 - check dieseling solenoid on the carb and ensure initial timing properly set. #4 - put the half-soup can shield between starter and the block. Don't see any, but no headers, correct? #6 - what gear ratio are you seeking? Probably have a pretty decent one from the factory for the K10 with big tires added. Might be easier to add an o/d trans than swap both gearsets.