The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rick4076 · 10-03-2016, 10:10 AM

I have to slam my driver door to get it to close. It seems that it his hitting the inside door rubber before it's even close to closing and puts a major bind on the door. I replaced the door pins and bushings but that didn't help. I tried moving the door in and out at the hinges but it seems like that they are as far out as they can go so my next attempt will be to replace the hinges and possibly shim behind them. Do you have to remove the fender to get to the hinge bolts or is there another way?

10-03-2016, 10:10 AM	#1
Rick4076 Registered User Join Date: Sep 2016 Location: Portland, Oregon Posts: 49	doorr hinge removal I have to slam my driver door to get it to close. It seems that it his hitting the inside door rubber before it's even close to closing and puts a major bind on the door. I replaced the door pins and bushings but that didn't help. I tried moving the door in and out at the hinges but it seems like that they are as far out as they can go so my next attempt will be to replace the hinges and possibly shim behind them. Do you have to remove the fender to get to the hinge bolts or is there another way?