[Chrispbrown36]

Ok, so the truck still will not start. I have tested everything I can think of. Fuel pressure is fine, fuel is making it to the bowls the injectors are sitting in, I am getting voltage from the injector harness, ECM fuses are fine. I tested the injectors for resistance and I get zero ohms on them. I have tested the injectors with a 9v battery and there is no click. I have gone back through the connections and still can not find anything that I might have missed. I keep reading about grounds on the back of the heads and found a ground wire on the rear passenger side that is intact.
At this point I am really leaning toward the injectors being bad, but I haven't ruled out the ignition control module since I have read that if it has gone bad it will not tell the computer to fire the injectors.