The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - MI MI-WTB 292 RH Engine Perch

**old51sedan** · 11-01-2016, 10:23 AM

If your truck has the original SPID sheet in the glove compartment it should say if it was equipped with a 292, if it doesn't mention an optional motor is more than likely came with the 250 six. I'm also told that the RH perch for the 292 is part # 3822956, but I'm not sure. Maybe someone has a book and can verify that for us. My 69 came with the 250 so the SPID doesn't mention an optional motor. Also if it had came with a 292 it should have a 292 emblem below the C/10 emblem on the side fender.

11-01-2016, 10:23 AM	#6
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 904	Re: MI-WTB 292 RH Engine Perch If your truck has the original SPID sheet in the glove compartment it should say if it was equipped with a 292, if it doesn't mention an optional motor is more than likely came with the 250 six. I'm also told that the RH perch for the 292 is part # 3822956, but I'm not sure. Maybe someone has a book and can verify that for us. My 69 came with the 250 so the SPID doesn't mention an optional motor. Also if it had came with a 292 it should have a 292 emblem below the C/10 emblem on the side fender. Last edited by old51sedan; 11-01-2016 at 10:27 AM. Reason: Add more Imformation