Here are some pics of my sway bar addition. Got new bushings showing up today so I am going to get everything painted up and finished.
Probably a little hard to tell what your looking at but I took 4x4 frame side mounts and drilled new holes in my 2x4 frame to bolt them up, then the one little foot that comes off the side I used a piece of pipe to give it strength then bolted that to the front crossmember.
Ended up needing this little spacer on my application to bring the bar back down to more parallel instead of having a sharp angle up. So its just a piece of 2x3 square tube cut to fit with holes drilled through.
