Quote:
Originally Posted by D13
So now I'm totally puzzled. The ad is for 81 up and includes relays but the note indicates that 81 up does not need relays because the circuit is already there, and all that is needed is to splice in the current sensing auto down module.
Given the age of the wiring and lack of speed in my 87's windows, I was already looking at doing the relay mod. So this kit would give me the relays and auto down and new wiring to the switch, and will work with my 87, correct?
Would this also be a drop in to retrofit early trucks that did not have power windows, assuming an 81 up motor was used?
|
That is all correct. Some people like to have relays anyway so that you can have an external keyfob for example that can be used to have a ground output signal trigger the relay which would work independent from the solid-state module. The fastest possible window speed combination is to use a relay upgrade and have that power the solid state module directly-again, its overkill but is very effective. For some cost is an issue so there are many ways to incorporate a kit into what you have.
To keep from adding a lot of confusion to the thread you can PM me too with specific questions if you want. Once you get everything it really makes sense how it all works together.